goods
 
DOZUKI 9.5 INCH
remove
Dozuki Saw
This is a 9-1/2 inch dozuki (Dovetail) saw, a type of backsaw. The Japanese word “dozuki” means “attached trunk”, so it has a stiffening rib attached. A dozuki allows the user to create a narrow, precise cut due to its thin blade and its easiness to control.
A remarkable point of this SUIZAN dozuki saw is its precision. Amazingly, the Kerf Width is 0.016 inch! You can do every woodworking with it.
  1. Japanese Saw - “Pull Saw” for both of soft wood and hard wood like tiger maple, red oak, teak, MDF, OSB, or even driftwoods.
  2. Consisted of top quality Japanese steel: It combines durableness, sensitivity and powerfulness.
  3. Teeth Per Inch: 25 TPI / Blade Thickness: 0.012 inch / Kerf Width: 0.02 inch / Blade Length: 9-1/2 inch / Overall length: 24 inch
  4. The saw blade is easily removable and interchangeable.

Do you know about a “Pull Saw”?
This product is a pull saw.
Japanese saws cut materials via pulling and thus are called “pull saws.”
It requires less power, realizes exceedingly smooth and accurate cut, and as a result, the cutting-section is clean.
And particularly, this saw’s blade is sharper and thinner (0.012 inch), and has a greater number of teeth per inch (25 TPI) than saws of similar size.
If you have some difficulty using Western saws, just get to use a Japanese saw.
You will never go back to use a conventional saw!
DOZUKI 9.5 INCH
53,24 EUR
 
RYOBA 9.5 INCH
remove
This is a Ryoba Saw
A remarkable point of this Ryoba (Double Edge) Saw is that there are two blades in one saw – Cross-Cut and Rip-Cut.
Therefore, you don’t have to change your tools: you just use it!
It is a tool that saves your time and saves your space in your tool box.
Cross-Cut
To cut across the grain is called cross cut. Cross cut teeth consist of two teeth in which one points slightly to the right and the other to the left. Cross cut teeth cut wood fiber at a certain width. It works the same when cutting the grain diagonally.
Rip-Cut
To cut along the grain is called rip cut. Rip cut tooth also consists of two teeth. The teeth edge is flat, and it carves out the materials as you make strokes. Since rip cut teeth carves out the material it’s cutting, there more saw dust is produced.
Cane-Wrapped Handle
The handle is wrapped with traditional rattan cane. This wrapping is very durable and if cared for will not unravel.
  1. Japanese Saw - Pull Saw for both of soft wood and hard wood like tiger maple, red oak, teak, MDF, OSB, and even driftwoods.
  2. Two blades in one saw: there is Cross-Cut and Rip-Cut teeth on a single handle
  3. Teeth Per Inch: 9 and 15 TPI / Blade Thickness: 0.02 inch / Kerf Width: 0.03 inch / Blade Length: 9-1/2 inch / Overall length: 24 inch
  4. The saw blade is easily removable and interchangeable

JAPANESE STYLE PULL SAW: This product is a “Pull Saw” .What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
RYOBA 9.5 INCH
49,37 EUR
 
KATABA 10,5 INCH
remove
This is a Kataba Saw
A remarkable point of this Kataba (Single Edge) Saw is its 10-1/2 inch longest blade.
When you use a saw, the longer the blade is, the easier your work is.
In addition, you can exchange the blade in a moment without any tools. You will be relieved from any stress.
  1. Japanese Saw – “Pull Saw” for both of soft wood and hard wood, like tiger maple, red oak, teak, MDF, OSB, and even driftwoods.
  2. With the longest blade in our lineup, it contributes to powerfulness and easy handleability.
  3. Teeth Per Inch: 14 TPI / Blade Thickness: 0.024 inch / Kerf Width: 0.03 inch / Blade length: 10-1/2 inch / Overall Length: 23-1/2 inch
  4. The saw blade is easily removable and interchangeable.

One of the Japanese Tools
There are a couple of differences between Western tools and Japanese tools.
In many cases, Japanese tools are lighter and simpler than Western ones because Japanese tools are minimally designed and there is no unnecessary waste.
Nowadays, Japanese tools become popular in woodcrafting around the world due to its high quality.
KATABA 10,5 INCH
39,92 EUR
 
FLUSH CUT 5 INCH
remove
  1. Japanese Pull Saw for cutting off excess wood without damaging its surrounding
  2. With its thin blade, the saw will be able to bend to be pressed against the surface so the cut end will be completely flat.
  3. Teeth Per Inch: 17 and 25 TPI /  Blade Thickness: 0.012 inch / Kerf Width: 0.012 inch / Blade Length: 5inch
  4. Suitable Blade for Hardwood and Softwood - Thin and sharp teeth can cut off excess wood cleanly. The blade for hardwood has a special shape so that the blade will last for a long time.

TIPS ON HOW TO USE
Although the point of the flush cut saw is to cut off the dowel so that it is at level with its surrounding surface,
placing a slightly thick piece of paper beneath the cutting area will make sure that the surrounding surface does not get damaged.
This can be done by creating a hole slightly larger than the diameter of the dowel in the paper, such as business cards, and sawing from top of it.
When using a dowel, you can use glue to put it into place, but once it is placed properly, make sure to remove the excess glue with a small wet paintbrush, because once it gets dry, it is not only hard to remove, but also may interfere with the cutting process.
BLADE FOR HARDWOOD AND SOFTWOOD
You can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine by robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and so on.
FLUSH CUT 5 INCH
26,62 EUR
 
lantern
remove
Dimensions 120mm (l) x 120mm (w) x 160mm (h)
Materials: Pine wood
The lantern has an ancient symbol for sunlight. This sign conveys the knowledge and wisdom of ancestors. Identifies talents and leads to success.
A beautiful night kumiko lantern for children. Children fall a sleep quickly and sleep soundly through the night. This pattern is comprised of 124 individual pieces. The lamp comes with a flameless LED Electronic Candle.
lantern
64 EUR
 
wall shelves
remove
Dimensions 400mm (l) x 160mm (w) x 50mm (h)
Weight: 400 g
Materials: Pine wood
  1. Fully constructed in wood ( no screws ).
  2. Strength is enhanced with the addition of a mortise and tenon wood joinery technique.
  3. Finished with natural oil and bee's wax.
wall shelves
60 EUR
 
coasters
remove
Dimensions: 15cm x 15cm
Materials: Pine, thermowood
Kumiko is a japanese technique of assembling wooden pieces without the use of nails. Thinly slit wooden pieces are grooved, punched and mortised, and then fitted individually using a plane, saw, chisel and other tools to make fine adjustments.
Asa-no-ha pattern.
34 individual pieces were used to create this coaster. The frame is made of thermowood.
Finishing - oil.
coasters
20 eur
 
TRAY 
remove
Dimensions: 45cm x 27cm
Materials: Birch, pine
Kumiko is a japanese technique of assembling wooden pieces without the use of nails. Thinly slit wooden pieces are grooved, punched and mortised, and then fitted individually using a plane, saw, chisel and other tools to make fine adjustments.
Goma-gara pattern.
163 individual pieces were used to create this coaster. The frame is made of oak.
Finishing - oil.
tray
120 eur
 
bathroom mat 
remove
Dimensions 330mm (l) x 390mm (w) x 30mm (h)
Weight: 800 g
Materials: Quaking aspen
  1. Fully constructed in wood ( no screws ).
  2. Strength is enhanced with the addition of a mortise and tenon wood joinery technique.
  3. Aspenwood the ideal species of wood for the production of bathroom products.

This wooden bath mat brings a piece of nature to the city apartment. Bare feet stand comfortably on the naturally smooth, non-slip surface of the mat, and water flows through the slats along the beveled edges.
bathroom mat
40 EUR
 
beer mug
remove
Dimensions 100mm (d) x 160 mm (h)
Capacity 0,6 liter
Weight: 340 g

This handmade beer mug is made from wood, has comfortable handle and is decorated with a stainless thread. Can be used for a beer and other cold beverages.
Great gift for father's day, wedding, anniversary, birthday, retirements or any other special occasion. There is no better gift if man loves beer - receiver also will love this mug.

HOW TO ORDER:
1.Press "TO ORDER"
2.Select the number of mugs that you need;
3.Select a personalization option:
1.No – 30. Eur
2.Text + 10. Eur
3.Logo +15. Eur
4.Custom +20. Eur
4.Add your personalization.
Please select: Font, Name, Title, & Date.
Example:
Font #1, David, Groomsman, 08.19.21
Font #8, Father, Best Man, 08.16.21, 08.19.21
5.If you want to engrave an image or picture, send me, please, a message with an attached file image (*.bmp,*.jpg)
6.Please, provide a phone number for EMS delivery service (required for shipping).
7.Pay for your order.
8.The term of production is 3-5 days.
Tracking Number will be provided.

** Please note, personalized orders are non-refundable.
beer mug
30 EUR
 
Flask
remove
Dimensions 185mm (l) x 102mm (w) x 185mm(h)
Capacity 1 liter
Weight: 440 g
Materials: Pine wood, stainless steel

Real cooper work.
This flask can be filled with alcoholic beverages like vodka. whiskey, rum and liquors.
User instructions:
1. Empty flask must be stored in temperature below 16 Celcius.
2. Before first use fill the flask with cold water for 24 to 48 hours. It will seal.
3. Flask is ready to be filled up.
flask
50 EUR
 
japanese Stool
remove
Dimensions:  350mm (l) x 180mm (w) x 256mm (h)
Weight:  1.3 kg
Materials: Pine wood
  1. Durable
  2. Strong
  3. Lightweight
  4. Convenient
  5. Practical
  6. Takes up little space
  7. Always needed
  8. Serves for a long time
  9. Very beautiful
japanese stool
80 EUR
 
the bird  of happiness
remove
Dimensions:  270mm (d)
Materials: Wood & papeк

Did you know that spotting a bluebird is usually recognized as a symbol of joy and happiness that you'll be expecting in the future? The symbol of the bluebird is found in many cultures and dates back thousands of years. It can also represent hope, cheerfulness, prosperity, good health, and renewal coming your way!
 the bird of happiness
25 EUR.
 
spoon
remove
Dimensions: 300mm (l) x 54mm (w) x 10 -15mm (h)
Weight: 34 g
Materials: Beech wood
Series CHOCOLADO. Products are made using the Shou-Sugi-Ban / Yakisugi technique. Without chemical paints. YAKISUGI (焼杉) is a traditional Japanese method of wood preservation. High temperature treatment improves the properties of wood.
  1. All viruses and bacteria destroyed.
  2. Increased hardness.
  3. Water-proof.
  4. Finished with natural oil.
  5. These spoons will vary slightly in color.

Spoon
20 EUR
 
spatula 
remove
Dimensions: 300mm (l) x 50mm (w) x 3 -5mm (h)
Weight: 24 g
Materials: Beech wood
Series CHOCOLADO. Products are made using the Shou-Sugi-Ban / Yakisugi technique. Without chemical paints. YAKISUGI (焼杉) is a traditional Japanese method of wood preservation. High temperature treatment improves the properties of wood.
  1. All viruses and bacteria destroyed.
  2. Increased hardness.
  3. Water-proof.
  4. Finished with natural oil.
  5. These spatulas will vary slightly in color.

spatula 
15 EUR
 
cutting board
remove
Dimensions: 250mm (l) x 150mm (w) x 12 -15mm (h)
Weight: 310 g
Materials: Beech wood
Series CHOCOLADO. Products are made using the Shou-Sugi-Ban / Yakisugi technique. Without chemical paints. YAKISUGI (焼杉) is a traditional Japanese method of wood preservation. High temperature treatment improves the properties of wood.
  1. All viruses and bacteria destroyed.
  2. Increased hardness.
  3. Water-proof.
  4. Finished with natural oil.
  5. These boards will vary slightly in color.

cutting board 
35 EUR
 
SIA LIA ITC LV40103018477 ANNO 1991 © ALILADO.COM 2021